!9# Razor E175 Compare: March 2011

!9# To replace a Razor Scooter Battery

[if ]

[endif]

Razor produced a fabulous line of electric scooters, which are very convenient to drive, comfortable and easy. The shaver can reach speeds of up to 10 miles and this type of scooter is not only a popular toy for children, but a transport system for the preference for adults. Razor scooters are usually an easy to maintain. could probably run the complex issue of changing the battery, should begin to slow down in itsAbility to sustain a charge. You can easily share razor scooter battery, regardless of the model that you might have.

Guidelines
Articles may be necessary:

* Phillips head screwdriver

1. Remove the 4 anchor bolts at the top of the bridge with a screwdriver. Then lift the cover from the chassis. You will see the battery inside under the bridge.

2. Remove the power accessory (to be determinedbattery) and follow the signs to the white plug-ins that connect to the electrical wiring of the scooter. Press both tabs on the side, and separate the connector. For those who have E100/E125/E150/E175 version, you should have two power supplies. Both of their connections must be separated from the wiring scooter. Remove the battery from the inside.

3. Place the new battery into the battery compartment. Here is a brandnew battery for many of the Razor Scooter for almost every car dealer supply, a scooter shop or big box retailer. Make sure the battery level, sitting in the bottom drawer. Connect the accessory cable directly into the wiring from the new battery will be on the same connection as they have recently separated. Just squeeze the two halves of the clamp to a fixed place. Set the platform onFold and tighten.